Expert Water Heater Repair Services in Irvington, KY

The anode rod is a magnesium or aluminum core inside the tank that attracts corrosive minerals, sacrificing itself to prevent the steel tank from rusting. It should be inspected every 2 to 3 years and replaced when more than 50% depleted.

Popping, banging, or rumbling sounds indicate heavy mineral sediment accumulation at the bottom of the tank. As trapped water boils beneath this sediment layer, steam bubbles burst violently. A professional sediment flush by Water Heater Repair Masters in Irvington, KY can eliminate this noise.

A pilot light that won't stay lit is usually caused by a faulty or carbon-coated thermocouple, a blocked pilot orifice, a defective gas valve magnet, or poor combustion air intake. Call (877) 276-9926 to have a technician test and replace the thermocouple safely.

The T&P relief valve opens to release excess pressure or heat. Leaking can indicate excessive municipal water pressure (above 80 PSI), thermal expansion from a closed plumbing loop, or a defective valve seat that needs replacement.

If your water heater is under 10 years old and the problem involves a replaceable component—such as a heating element, thermostat, thermocouple, or relief valve—repair is usually cost-effective. However, if the internal tank has rusted through and is leaking from the base, replacement is necessary.